HS Code Lookup

UK commodity code for machinery

The UK commodity code for machinery falls under heading 8479 — Machinery and mechanical appliances; having individual functions, n.e.c. in this chapter. The specific 10-digit UK codes are listed below.

UK commodity codes for machinery

• 8479.30.10.00 Presses
• 8479.30.90.00 Other
• 8479.89.30.00 Mobile hydraulic-powered mine roof supports
• 8479.89.60.00 Central greasing systems
• 8479.89.70.00 Automated electronic component placement machines of a kind used solely or principally for the manufacture of printed circuit assemblies
• 8479.89.97.00 Other
• 8479.89.97.10 The following goods, for use in civil aircraft :!1!Hydropneumatic batteries;!1!Mechanical actuators for thrust reversers;!1!Toilet units specially designed;!1!Air humidifiers and dehumidifiers;!1!Servo-mechanisms, non-electric;!1!Non-electric starter motors;!1!Pneumatic starters for turbo-jets, turbopropellers and other gas turbines;!1!Windscreen wipers, non-electric;!1!Propeller regulators, non-electric!1!
• 8479.89.97.28 Integrated electric brake unit for immediate generation of the hydraulic pressure during braking, full electronic brake control and enabling regenerative braking of motor vehicles with: -electronic brake assistants, -hydraulic unit driven by brushless electric motor, -brake fluid reservoir, for use in the manufacture of hybrid passenger cars
• 8479.89.97.33 Pre-assembled process module unit of an ethane cracker unit, containing: -various distillation columns (depropanizer, debutanizer and degreenoiler) and their associated heat exchangers, pumps and drums, -a chilling train containing heat exchangers and a drum which condenses C2 in a gas stream, -a system to separate hydrogen and methane from cracked gas containing heat exchangers, drums, turbines, compressors and a hydrogen purification unit (pressure swing adsorption unit), -associated equipment of a C3 splitter distillation column, containing heat exchanger, pumps and drums, and -a vinyl acetylene hydrogenation system, containing hydrogenation reactors, filters, mixer, drum, condenser, heat exchangers
• 8479.89.97.38 Camshaft actuator for controlling the timing of valve opening by using electromotor in a continuous variable valve timing system of an internal combustion piston engine, of: -a length of 110 mm or more but not more than 140 mm, -a width of 90 mm or more but not more than 130 mm, -a height of 80 mm or more but not more than 110 mm for use in the manufacture of engines of motor vehicles
• 8479.89.97.43 Pre-assembled process module unit of an ethane cracker unit, containing: -a system for filtering and cooling of dried cracked gas, -a deethanizer distillation column and associated equipment for C2-/C3+ separation, -an acetylene hydrogenation system to remove acetylene within a C2 stream, -a fuel gas drum that stores fuel gas for cracker furnaces, and -a system to regenerate dryers in a cracker installation
• 8479.89.97.60 Bioreactor for biopharmaceutical cell culture - having interior surfaces of austenitic stainless steel, and - with a process capacity up to 15 000 litres, - whether or not combined with a “clean-in-process” system and/or a dedicated paired media hold vessel
• 8479.89.97.90 Other
• 8479.90.15.00 Parts of machines of subheading 8479 89 70
• 8479.90.20.10 For use in civil aircraft
• 8479.90.20.90 Other
• 8479.90.70.00 Other
• 8479.90.70.10 For use in civil aircraft
• 8479.90.70.40 Housing of the rotor part of the mechanical unit ensuring the adjustment of movement of the camshaft compared to the crankshaft: -of a circular shape, -made of steel alloy with sintering process, -with not more than 8 oil chambers, -with a Rockwell hardness of 55 or more, -with a density of 6,5 g/cm³, or more, but not more than 6,7 g/cm³
• 8479.90.70.60 High-pressure seamless cylinders for compressed or liquefied gas, of steel, of all diameters and volume capacities, whether or not threaded, regardless of internal coating or plating, regardless of external finishing and shape, whether or not with a gas bladder inserted, regardless of the cylinders’ fitting with a valve, neck ring, foot ring or piping, whether or not fastened together to form a bundle
• 8479.90.70.85 Injectors with solenoid valve for optimised atomisation in the engine combustion chamber
• 8479.90.70.99 Other

International equivalents for machinery

Region	Code system	Heading
🌐 Global (WCO)	Harmonized System (HS)	8479
🇺🇸 United States	HTS	8479.10.00.40
🇪🇺 European Union	CN/TARIC	8479.30.10.00

Where it sits in the hierarchy

Chapter 84 — Machinery and mechanical appliances, boilers, nuclear reactors; parts thereof → Heading 8479 — Machinery and mechanical appliances; having individual functions, n.e.c. in this chapter

Related commodity code lookups

• UK commodity code for computers

FAQ

Also see: Global HS code for machinery · US HTS code for machinery

Beta — data is for general reference only and may be incomplete or inaccurate. Always verify with HMRC or the UK Trade Tariff before making import/export decisions.